There there is a new pair of kicks in the Scarpa arsenal that I think more people will really sink their feet into more than the others- that is the Booster S. I really wanted to get a good feel for this shoe because at first glance it looks a lot like the Boostic and Instinct VS had a baby. But au contraire this shoe is a very different beast. This shoe is a precision steep climbing weapon and it is not just a softer version of the Boostic like others have claimed it to be- the shaping and feel are most certainly different between the two shoes. Sizing is consistent between both shoes- which which for me is a 40.5. The break in time was much less as I assumed it would be with the Booster S than with the Boostic.
Shape
It looks very similar to the Boostic at least in appearance but if you put the two right next to each other you will notice that they are very different. The shape of the Booster S is much more downturned for super precise foot placements than the somewhat flat-footed Boostic. So while the Booster S is indeed softer than the Boostic, it also has a completely different construction and shape. Check out these side by side photos comparing each shoe.
Rubber
The next major thing that is the difference is the rubber in these shoes. The Booster S uses the super sticky and softer Vibram XS Grip 2 which is insanely sticky and long lasting as well. The first time I tried this shoe on in the gym I immediately noticed the huge difference between this rubber and the XS Edge which the Boostic uses. It is much softer smears and definitely sticks better. It does deform a little bit more when doing serious edging and slab work compared to the XS Edge Rubber on the Boostic but it sticks better - that is the trade off. We will get more into that later.
Closure System
The closure system is virtually the same between each shoe. The alternating Velcro closure really keeps the shoe tight and stable with no weird bunching or pressure points even for me I have a very high instep and arch.
Rand System
This shoe has a very interesting active rand system called the Tri-Tension system that is combined with a thin support ribbon that is basically a very minimalist sole. This gives a ton of power too the forefoot and toe with also just enough stiffness for extra stability while edging. The Tri-tension system appears to be a blend of between the V-tension the Boostic uses and the X-Tension that the Stix uses. Despite my looking into it I have yet to figure out how the tension in this system works. All I know it creates a rare blend of shoe that is both slipper like and stiff in the toe.
For those with questions on what exactly Active Randing the insert below is directly from Scarpa regarding the subject.
Heel
The heel in this shoe feels very similar to the Boostic. It does have a softer more flexible feel (likely do to the difference in rand construction) for me at least so there is a bit more sensitivity for accurate placements.
Pros
Down turned excellent on steeps
Vibram XS Grip 2 is a super sticky rubber smears very well
Sensitive
Good indoor and outdoor
Very Comfortable once broken in
Cons
Shoe can be painful in cracks because it is pretty soft and downturned
Durability maybe an issue. I have had some delaming occur on the toecap due to toe hooking.
Vibram XS Grip 2 might not be as durable and long lasting as the XS Edge.
Conclusion
I really really like the Booster S for bouldering, gym climbing and sport climbing. It can do just about everything well. However on long routes or where any toe jamming is involved I prefer the more supportive Boostic. Both are superior shoes and well worth a try.
L8er,
podenbeck
 |
| Scarpa Booster S |
Shape
It looks very similar to the Boostic at least in appearance but if you put the two right next to each other you will notice that they are very different. The shape of the Booster S is much more downturned for super precise foot placements than the somewhat flat-footed Boostic. So while the Booster S is indeed softer than the Boostic, it also has a completely different construction and shape. Check out these side by side photos comparing each shoe.
 |
| Toe compare Booster S (left) Boostic (right) |
 |
| Sole Comparison Booster S (bottom) Boostic (top) |
 |
| Downturn Comparison Boostic (right) Booster S (left) Notice how much more aggressive the Booster S is! |
 |
| Top down Comparison Booster S (top) Boostic (bottom) Notice again how aggressive the Booster S is, because it is so aggressive it does not sit flat like the Boostic on a flat surface. |
Rubber
The next major thing that is the difference is the rubber in these shoes. The Booster S uses the super sticky and softer Vibram XS Grip 2 which is insanely sticky and long lasting as well. The first time I tried this shoe on in the gym I immediately noticed the huge difference between this rubber and the XS Edge which the Boostic uses. It is much softer smears and definitely sticks better. It does deform a little bit more when doing serious edging and slab work compared to the XS Edge Rubber on the Boostic but it sticks better - that is the trade off. We will get more into that later.
Closure System
The closure system is virtually the same between each shoe. The alternating Velcro closure really keeps the shoe tight and stable with no weird bunching or pressure points even for me I have a very high instep and arch.
Rand System
This shoe has a very interesting active rand system called the Tri-Tension system that is combined with a thin support ribbon that is basically a very minimalist sole. This gives a ton of power too the forefoot and toe with also just enough stiffness for extra stability while edging. The Tri-tension system appears to be a blend of between the V-tension the Boostic uses and the X-Tension that the Stix uses. Despite my looking into it I have yet to figure out how the tension in this system works. All I know it creates a rare blend of shoe that is both slipper like and stiff in the toe.
For those with questions on what exactly Active Randing the insert below is directly from Scarpa regarding the subject.
SCARPA Active Randing Principles
· Working by hand, Italian craftsmen skilfully pre-stretch special shapes of die-cut rubber; these become our Active Rands and form an integral part of the shoes construction.
· This specialized process effectively spring loads the shoe, with elasticity which is then stored as energy within its structure.
· Each different shoe cradles the foot in its own way. This provides strategic support, allows dynamic adaptation, and promotes natural movement of the foot.
· The result is an active environment where the pre-generated power can be intelligently distributed onto footholds, where it is applied with precision.
· Active Randing is designed by Heinz Mariacher exclusively for SCARPA
Heel
The heel in this shoe feels very similar to the Boostic. It does have a softer more flexible feel (likely do to the difference in rand construction) for me at least so there is a bit more sensitivity for accurate placements.
 |
| Heel Compare Booster S (left) Boostic (right) |
Down turned excellent on steeps
Vibram XS Grip 2 is a super sticky rubber smears very well
Sensitive
Good indoor and outdoor
Very Comfortable once broken in
Cons
Shoe can be painful in cracks because it is pretty soft and downturned
Durability maybe an issue. I have had some delaming occur on the toecap due to toe hooking.
Vibram XS Grip 2 might not be as durable and long lasting as the XS Edge.
Conclusion
I really really like the Booster S for bouldering, gym climbing and sport climbing. It can do just about everything well. However on long routes or where any toe jamming is involved I prefer the more supportive Boostic. Both are superior shoes and well worth a try.
 |
| Topping out the Eleven Star with the Booster S |
L8er,
podenbeck
